新澳门金沙网址

Product Navigation
Shanghai Yuyin Machinery Co., Ltd. Contact Us:
Miss Li 13917412877 Tel: 021-69790948 / 69790949 Fax: 021-69792046
National Free Hotline: 400-668-0948
Your present location: ConveyorNews Center > Detail

What is the reason for the screw conveyor screw shaft to stop?

The structure of the screw conveyor is simple, but several problems are often encountered during the specific operation. Everything has a wear period, especially non-standard products such as mechanical equipment, which will inevitably encounter unexpected problems in use The editor of Shanghai Yuyin will give you a specific explanation, I hope to help everyone:
First, the stop of the screw shaft of the screw conveyor is generally caused by three reasons;
1. The conveying material is too large, and the material cannot pass through the intermediate hanging bearing smoothly, and the material resistance is too large at the intermediate bearing. Causes the motor to stop running under overload. At this time, the materials in the screw conveyor must be cleaned.
2. The resistance at the middle bearing is too large, and the seal is damaged. Material entering the bearing causes the bearing not to rotate or bearing damage.
3.Bearing of reducer bearing
2. The temperature of the reducer bearing rises too fast after driving, there is an abnormal noise, and it is accompanied by the vibration of the motor and the reducer. You should stop quickly and find the cause in the following areas:
1. The bearing temperature at the output shaft of the reducer is high. The temperature at the input shaft is normal. This is because the center of the screw shaft is shifted or the bearings at the output shaft of the reducer are burned, and the head and end bearing seats are loose. It is necessary to loosen the coupling between the reducer output shaft and the screw shaft, and recalibrate the installation.
2. The bearing temperature at the output shaft of the reducer is normal, and the temperature at the input shaft is high. This is due to the loosening of the motor fixing components or the burning of the bearings at the reducer output shaft. It is necessary to loosen the coupling between the reducer input shaft and the motor and re-calibrate the installation.
3. The temperature of the reducer output and input bearings is high. This is because the fixing bolts of the reducer are loosened or the bearings at both ends of the reducer are burned. You need to loosen the couplings at both ends of the reducer to re-calibrate and install them! Shanghai Yuyin is a professional manufacturer of screw conveyors, customizing your own conveyor machinery.
Shanghai Yuyin Machinery Co., Ltd. http://shxierui.com/


Product navigation: conveyor belt roller conveyor belt conveyor screw conveyor chain conveyor sorting conveyor belt chain plate sprocket roller fluent universal ball blessing to round adjust foot chocks
Conveyor | Conveyor line | Production line | Conveyor equipment | Conveyor accessories | Sitemap | Sitemap | Yuyin Machinery QQ Online Customer Service 沪 ICP 备 10041176 号 -2
Copyright: tone Haiyu Machinery Co., Ltd.: Road Qingpu Titan 1288 a 5 layer B compartment 549 Tel: 021-69790948 13,917,412,877 In Email: sales@yuyin.shxierui.com
Yuyin-expert in transportation equipment, quality person in domestic logistics transportation industry!
中文电子游戏官网 电玩城游戏大厅 正规棋牌游戏平台 九五至尊网站是多少 网上棋牌手游大全 电子捕鱼平台 最火的捕鱼游戏 沙巴体育平台 帝豪游戏平台 胜博发娱乐游戏