新澳门金沙网址

Product Navigation
Shanghai Yuyin Machinery Co., Ltd. Contact Us:
Ms. Li13917412877 Tel: 021-69790948 / 69790949 Fax: 021-69792046
National Free Hotline: 400-668-0948
Your present location: ConveyorNews Center > Detail

Introduction of 6 installation steps for roller line

Today I will introduce the 6 major installation steps of the drum line .

( 1) The longitudinal centerline of the equipment is determined according to the device diagram of the drum line. This is the device benchmark of the drum line. In the workshop, it is usually marked with the plant column network as the reference, and the longitudinal centerline of the drum line is drawn.

( 2) If the equipment related to the drum line has been installed in place, the center line is determined based on the relevant scales of these adjacent equipments, and the scale of the relationship with the plant column network is for reference only. In this way, the drum line system can be more securely and reliably operated.

( 3) After determining the center orientation of the drum line, connect the frame and the legs according to the device diagram, install the drive frame and the motor, then install the nylon support bar, the chain, and then the drive roller and the redirection chain. For the wheels (the end faces of the two sprocket wheels must be in the same plane when installing), adjust the motor orientation so that the chain has a satisfactory tension.

( 4) Install the roller thread adjustment feet. Make sure the adjustment feet reach the planned device scale.

( 5) Install roller wire fence, electrical control system, motor cover, etc.

( 6) After checking the drum line, open the empty machine and test run. Some adjustments did not meet planning requirements and standards. During the test run, the tightness of the chain and the meshing condition between the chain and the roller sprocket must be checked, and it is inappropriate to adjust in time.

Shanghai Yuyin Machinery Co., Ltd. http://shxierui.com/



Product Navigation: Belt Conveyor Drum Conveyor Mesh Belt Conveyor Screw Conveyor Chain Plate Conveyor Sorting Conveyor Mesh Belt Chain Plate Sprocket Roller Fluent Universal Ball Fulai Wheel Adjusting Foot Bearing Block
Conveyor | Conveyor line | Production line | Conveyor equipment | Conveyor accessories | Sitemap | Sitemap | Yuyin Machinery QQ Online Customer Service 沪 ICP 备 10041176 号 -2
Copyright: Shanghai Yuyin Machinery Co., Ltd. Address: Room 549, Zone B, 5th Floor, No. 1288 Huateng Road, Qingpu District, Shanghai Phone: 021-669790948 13917412877 Email: sales@yuyin.shxierui.com
Yuyin-expert in transportation equipment, quality person in domestic logistics transportation industry!
中文电子游戏官网 电玩城游戏大厅 正规棋牌游戏平台 九五至尊网站是多少 网上棋牌手游大全 电子捕鱼平台 最火的捕鱼游戏 沙巴体育平台 帝豪游戏平台 胜博发娱乐游戏